For now, the default Omega AP can only be modified via the command line, so you will need an ssh or usb serial connection.


Once you have terminal access to the Omega, the following command will modify the default AP network:

wifisetup -accesspoint -ssid <name of desired ssid> -auth <network encryption type> -password <desired password>



There are 4 options for the network encryption type:
  • psk2
    • WPA2 Encryption
    • The recommended and most commonly used type
    • Password must be at least 8 characters long
  • psk
    • WPA Encryption
    • Password must be at least 8 characters long
  • wep
    • WEP Encryption
    • Old authentication type, not recommended
    • The key must be either 10 or 26 hex digits
  • none
    • No encryption
    • No password required in the above command